PP (Polypropylene)
| Grade | MFI (g/10min.) 1,2,16kg ASTM D1238 |
Special Charateristics | Typical Applications |
|---|---|---|---|
| POLYPROPYLENE - HOMOPOLYMER | |||
| Injection Moulding | |||
| MH03 | 3 | General Purpose | Thermoforming Containers, Rigid Packaging |
| MH05K | 5 | Anti Stat | Heavy Wall Parts, Consumer Products, Toothpaste Tubes, Closures, Tubes, Shrouds, Aerosol Spray Tubes, Housewares, Rigid Packaging |
| MH05T | 5 | Acid Acceptor | Heavy Wall Parts, Appliances, Dishwashers, Food Processors, Coffee Makers, Iron Parts, Consumer Products, Houseware, Rigid Packaging |
| MH10T | 10 | Medium Term Heat Aging (MTHA) | Thinner Wall Parts, Consumer Products Housewares, Rigid Packaging, Automotive |
| MH12N | 12 | Nucleated, Antistatic | Closure, Lids, Over Caps, Furniture, Housewares, Rigid Packaging |
| MH 13 | 13.5 | General Purpose | Thin parts/ Fast moulding, Housewares, Consumer Products / Packaging |
| MH 23 | 23 | High Flow | General Purpose, Very Thin Parts, Housewares, Consumer Products, Rigid Packaging |
| MH 25N | 25 | Nucleated, Antistatic | High Speed Moulding, Clousers, Rigid Packagiing, Housewares, Containers, Jars |
| MH 35N | 35 | Nucleated, Antistatic | Consumers Products, Housewares, Thin Walled Packaging |
| MH 53N | 53 | Nucleated, High Flow, Slip | Consumers Products, Housewares, Medical Components, Thin wall Rigid, Packaging, DVD Cases |
| MH 65N | 65 | Nucleated, High Flow, Slip, Clarity | High Speed IM of Media Cases and Housewares requiring exceptional See Through Clarity |
| Films | |||
| FH 08 | 8 | TQ:Water Quench, Slip, Antiblock | Merchandizing Bags, Sheeting |
| FH 08S | 8 | Cast: Slip, Antiblock | Flexible Packaging, Cheese Wrap, Bread Bags, Cereal Box Liners |
| FH 09 | 9 | Cast: Slip, Antiblock | Stationary, Flexible Packaging for Flowers, Pasteries Candies, Shirts |
| FH 03 | 3.4 | BOPP: Tenter, Frame | Flexible Packaging, Overwrap, Metalised Films |
| Fibre & Tape | |||
| RH02Y | 2 | General Purpose | Thermoformed Sheet: Tape, Woven Bags, Twin:BOPP |
| RH 03 | 3 | General Purpose | Tape (Raffia), Strapping |
| RH 22U | 23 | UV Stablised, Anti-Gas Fading | Continuous Filament, Caps & Closures, Consumers Products |
| RH 25X | 25 | Spunbonded, High Speed | Spunbonded, Non Wovens; Fine Denier Staple Fiber |
| RH 38 | 38 | Spunbonded, High Speed | Non-Woven, High Speed Spinning, Fine Denier Staple Fiber |
| Therforming Extrusion | |||
| EH 03N | 3 | Nucleated, good stiffness and optical properties |
Thermoforming Cups/ Trays, rigid food containers, general purpose Injection moulding |
| Grade | MFI (g/10min.) 1,2,16kg ASTM D1238 |
Special Charateristics | Typical Applications |
|---|---|---|---|
| POLYPROPYLENE - IMPACT COPOLYNER | |||
| Injection Moulding | |||
| M103 | 3.5 | High Impact, Good Stiffness | Injection Molding: Blow Moulding |
| M1 08N | 8 | Nucleated, Antistat | Crates and Other Returnable Transport Packaging Large Pails and Containers, Stadium Seating, Luggage |
| M1 12NX | 12 | Nucleated, Antistat | Buckets, Crates, Toys, Luggage |
| M1 12NY | 12 | Nucleated | Automotive, Consumers Products, Housewares, Compounding |
| M1 15 | 15 | General Purpose | Automotive Bumper Fascia, Air Dams, Exterior Trim |
| M1 20X | 20 | General Purpose | Housewares, Toys |
| M1 20Y | 20 | Ultra High Impact | Pet Carriers, Crates |
| M1 24K | 24 | Antistat | Industrial Parts, Cassettes, Compounding |
| M1 35V | 35 | Nucleated, Low Gloss | Auto Interior Trim, Under Instrument Panel, Air Ducts |
| M1 44N | 44 | Nucleated Antistat | Housewares, Appliances, Rigid Packaging, Furniture |
| M1 70N | 44 | Nucleated Antistat | Thin Walled Injection Moulding, Rigid Packaging for Dairy Products, Housewares, Caps & Clousers |
| M1 105N | 105 | Nucleated, Ultra Hi Flow | Thin Wall Rigid Packaging, Refrigerator Dairy Containers Stadium Caps |
| Extrusions | |||
| E101N | 1.5 | Nucleated | Corrugated Sheet (Twin Walled Sheet), Corrugated Pipe & Fittings, Thermoforming |
| E102N | 1.9 | High Stiffness | Thin Wall IM, Appliacnes, Compounding Consumer Product, Freezer to Microwave Packaging |
| Grade | MFI (g/10min.) 1,2,16kg ASTM D1238 |
Special Charateristics | Typical Applications |
|---|---|---|---|
| POLYPROPYLENE - RANDOM COPOLYNER | |||
| Injection Moulding | |||
| MR12V | 12 | High Clarity, Antistat | Rigid Packaging, Media Packaging, Housewares, Strech Blow Molding |
| MR20K | 20 | Nucleated, Antistat | Housewares, Rigid Packaging, Consumers Products |
| MR35K | 35 | Nucleated, Antistat Toughened | High Speed Molding, Rigid Packaging, Thin Wall Molding, Deli Containers, Housewares, ISBM |
| MR53K | 53 | High Clarity, Antistat | Thin-Walled Rigid Packaging, Consumers Products |
| Extrusions | |||
| ER00V | 0.3 | Low Term Heat Aging (LTHA) | Pipe, Sheet |
| ER 02 | 2 | General Purpose | Sheet Extrusion, Thermoforming, Shrinkage Film |
| ER 02N | 2 | Clarified, Antistant | Extruded Sheet & Profiles, Thermoformed Packaging, Extrusion Blow Molded Containers & Bottles, Injection Blow Molded Containers and Bottles |